Free Nationwide Delivery*

A koi pond with a fountain and pond glass

Pond Glass

(16 products)
Pond glass here covers the full range, viewing windows, low iron panels, jump guards and the fittings that hold them all in place. If you already know... Read more
Pond Glass Windows Low Iron Pond Glass Pond Jump Guards Pond Glass Fittings Blogs & Guides
View as

Four Products, One Range, Different Jobs

A pond glass window and a pond jump guard solve completely different problems, even though both are cut from the same toughened glass. A window sits in the wall of a raised pond and lets you see underwater. A jump guard sits above the waterline around the rim and stops fish, usually koi, clearing the edge and landing on the patio. Confusing the two at the ordering stage is the mistake we see most often, and it is an easy one to make when both are just called pond glass.

Low iron pond glass is not really a separate product. It is an upgrade to the standard viewing window. Ordinary toughened glass carries a faint green tint from the iron content in the raw material, barely noticeable on its own but obvious once you are looking through it at a koi. Low iron glass strips that tint back so the colour of the fish reads true. It costs more. For anyone building a display pond where colour genuinely matters, it is usually worth the difference.

Fittings hold the rest of the range together, literally. Every panel, window or jump guard, still needs panel supports and glass clamps, and on longer runs a stiffener or corner fitting to keep it rigid. None of it is stocked off the shelf. Everything here is toughened, laminated and heat-soaked in-house in West Lancashire, then cut to your exact measurements before it ships. Our pond glass fittings collection covers the full hardware range, and the guide to installing pond glass goes through fitting selection in more detail.
Every fitting in the range is stainless steel, built to sit in permanent contact with pond water without corroding or staining the glass it's holding. That matters more than it sounds. A fitting that starts to break down doesn't just look worse over time. It puts the panel it's supporting at risk too.

If you're planning a pond glass window installation or specifying jump guards for an existing koi pond, our guide on how to install pond glass covers fitting selection in more detail. For anything outside the standard range, get in touch and we'll help you specify the right hardware for your pond.

GLASS SPLASHBACKS

Add style and practicality to your kitchen or bathroom with our bespoke glass splashbacks. Available in a wide range of colours, finishes, and custom designs, they protect your walls while creating a sleek, modern look.

FREQUENTLY ASKED QUESTIONS

What Is Pond Glass?

Pond glass is toughened, laminated glass made for use in and around garden ponds, covering everything from viewing windows built into a pond wall to jump guard barriers fixed around the rim. It is not one single product. On this site it spans four collections, standard pond glass windows, low iron pond glass, jump guards and the fittings that hold them all in place.

What Is the Difference Between Pond Glass Windows, Jump Guards, Low Iron Glass and Fittings?

A pond glass window is built into the wall of a raised pond so you can see the fish from outside. A jump guard sits above the waterline around the rim to stop koi or large goldfish clearing the edge. Low iron pond glass is not a different product, it is an upgrade to the standard window that removes the green tint ordinary glass carries. Fittings are the stainless steel hardware, panel supports, clamps and stiffeners, that hold all three in place.

Is Pond Glass Safe for Fish and Pond Life?

Yes. Every product in the range starts from toughened glass, designed to break into small granular pieces rather than sharp shards if it is ever impacted. Our pond glass windows are also laminated and heat-soaked, then polished along every edge before they leave the workshop, so there is no rough or sharp glass anywhere the fish, or you, will come into contact with.

How Long Does Pond Glass Take to Make and Deliver?

It depends on the product, since nothing in this range is kept in stock, everything is cut to order. Pond glass windows typically take 10 to 14 working days to make once your measurements are confirmed. For jump guards and fittings, lead time is confirmed at the point of ordering since it depends on the specification you need.

Do You Deliver Pond Glass UK-Wide, Including to Trade Customers?

Yes. We are based in West Lancashire and supply pond glass, across every collection, to private pond owners, builders, interior designers and architects UK-wide. Pond glass windows and low iron pond glass both ship with free mainland UK delivery included in the price.

Can I Order Pond Glass Windows, Jump Guards and Fittings Together?

Yes, though each is ordered separately since panel sizes and specifications differ by product. If you are planning a full installation, viewing window, jump guard barrier and the fittings to hold both in place, it is worth working out your measurements for each collection before you order, or contact us so we can look at the whole project together.